What is the Makeblock XTool D1? Co2 Laser Cutting Machine Price
XTool D1 is a laser cutter that has been produced by Makeblock. Co2 Laser Cutting Machine Price
The business was established in 2012 by Jasen Wang, who studied airplane style at Northwestern Polytechnic College. The business is devoted to producing innovative items to assist individuals share themselves through creation. Given that its development, Makeblock has released a number of academic robotics, in addition to a coding platform for children. It also released the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can reducing and etching a selection of materials. Its laser can remove complex forms much faster than a scroll saw or jigsaw, as well as can be used for many different jobs. Along with inscription, the D1 can additionally be used for various other jobs, including creating precious jewelry and light shades.
The D1 is a DIY set that can be constructed in just concerning half a hr. Its room is foldable, allowing for easy portability and reliable ventilation. It is additionally made of flame-retardant polyester, making it secure from dirt bits. The enclosure likewise protects the working surface area under the maker.
The XTool D1 is equipped with a laser component that can engrave on steels and several various other materials. It has an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer engraving and also greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to inscribe on a wide range of materials. The D1 additionally has a built-in mobile phone app that can be downloaded and install from the Android Store or the Apple App Store. The application can be utilized to import laser layouts from complimentary vector websites, including Etsy. The D1 can also be attached to a computer system via USB or WiFi. It can also transfer data by means of Wi-Fi or a big capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most commonly utilized timbers for laser cutters. The D1 can also cut on various other woods, including difficult maple, walnut, and rosewood. Its laser head is flexible, permitting a 50mm range. It can likewise refine products approximately 10mm thick, which implies that it has the ability to inscribe on a wide array of products. The D1 is made for both home and also business use.
The XTool D1 comes in two models: the 20W variation and also the 5W version. The 20W version has a larger laser head, as well as a smaller working location. The 5W design has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster machine. Co2 Laser Cutting Machine Price
The D1 includes a steel structure, which supplies maximum stability and also sturdiness. It additionally has a simultaneous belt to enhance activity accuracy. The belt’s moderate tension is required for accuracy, especially when moving at high speeds. The simultaneous belt can likewise aid the equipment keep stable as well as reduce resonance. It can likewise remove the movement gap, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it a superb choice for almost all inscribing tasks. Its style is safe as well as reliable. It is ideal for small companies and also enthusiasts.
It can engrave different types of steel and also wood. It has the capability to reduce eight to tenmm plywood in one pass. It also has the capability to cut natural leather as well as acrylic.
It features a number of accessories. You can purchase the package pack that includes the Air Assist Set and Honeycomb Working Panel. It costs $119 and also $269, respectively. You can likewise obtain a 1064nm laser head. This head lowers burn marks in plastic as well as is particularly useful for delicate fashion jewelry styles. It also has an activity sensor as well as fire detection sensor.
It also includes an emergency stop switch. It can be managed through Wi-fi and can import laser styles from totally free vector sites like Etsy. You can likewise control it through the Makeblock XTool D1 app on Android and iphone.
It has a very good focus device. The laser crosshairs relocate as required and relocate to the structure of the artwork. This makes the inscribing extremely exact. It can likewise be utilized to produce a thickening result, which can be useful when etching huge products.
The XTool D1 Pro has boosted attributes and laser power. It uses a 20W laser module to create a light beam that cuts objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher speed. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this equipment is very smart. Next to the laser component, there is a pivoting arm which you pull out when you wish to concentrate the laser. It assures that you go down the head on the proper range from the material. Then you tighten the thumb screw and rotate the arm back up. Co2 Laser Cutting Machine Price
XTool D1 Special Features
Here are a few of the top Unique Features of the XTool D1:
Wireless Connectivity
Equipment can be connected by means of USB or a WiFi. And also you can likewise regulate with a smart device application on Android or iphone.
Cutting as well as Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The device can cut wood, especially Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would certainly prevent some plastics like PVC and vinyl given that it launches hydrogen chloride gas while being cut. This gas is hazardous as well as very corrosive (your device will rust swiftly).
We have checked the maker with engraving and cutting various products. You will find the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other makers. This must permit more precision and also much less mechanical wobble when etching at high speeds. Co2 Laser Cutting Machine Price
Advanced Stepper Electric Motor Drivers
The equipment has a really advanced controller board. It has Trinamic stepper electric motor drivers which drive the motors with a pure sine wave. In this manner the motors are very accurate as well as quiet. The vehicle drivers also support homing treatment without utilizing limit switches over as the vehicle drivers determine present with motors as well as identify the limit by doing this. This is why this machine does not require physical limitation switches over for homing.
The machine has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool automatically stops if an unexpected touch occurs. This is great for people that are worried regarding safety and security. The tool is also suitable with Windows and Mac OS systems.
The XTool D1 software application is really easy to use. Once you have actually the artwork prepared, you can utilize the app to set up the laser. You can also customize the laser settings and develop custom artwork. The application also consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver tool is easy to use and also comes with a safety cover. The maker has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching device. It cam be made use of to engrave on all kinds of products/.
Below is a checklist of materials as well as attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out maker. Accurate, rapid and also sturdily constructed. It comes at a costs price, however it is worth it for a person that desires a good and practically a commercial quality table top laser engraver with the ability of fast cutting and specific inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription as well as reducing equipment on our checklist is XTool D1 pro, the best choice to Glowforge. It remains in top place due to the fact that it has obtained the Red Dot Style 2022 Award. The outstanding design and also cutting edge modern technology set this machine in addition to other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, as well as XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and also inscribe a massive variety of materials, from something as slim as tissue paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription and also reducing device that is compatible with a wide variety of materials, consisting of different sorts of timber. Its effective and also very focused laser can quickly reduce as well as etched wood with utmost accuracy and precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is especially made for metal and also plastic inscription. It can engrave different metals, including aluminum as well as rare-earth elements. It can also do tinted etching on various steels, consisting of aluminum.
Co2 Laser Cutting Machine Price Co2 Laser Cutting Machine Price