What is the Makeblock XTool D1? 6040 Laser Cutting Machine
XTool D1 is a laser cutter that has been produced by Makeblock. 6040 Laser Cutting Machine
The business was developed in 2012 by Jasen Wang, that examined aircraft layout at Northwestern Polytechnic University. The firm is dedicated to creating cutting-edge products to assist individuals share themselves with development. Given that its development, Makeblock has launched several academic robots, in addition to a coding platform for children. It also released the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting and also engraving a range of materials. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, and also can be utilized for various projects. Along with engraving, the D1 can additionally be used for various other projects, including creating jewelry and also light tones.
The D1 is a DIY kit that can be assembled in only about half a hr. Its room is foldable, allowing for simple transportability as well as efficient air flow. It is also made from flame-retardant polyester, making it risk-free from dirt particles. The unit also protects the functioning surface under the equipment.
The XTool D1 is outfitted with a laser module that is capable of engrave on steels and also lots of other materials. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This permits finer inscription and higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to inscribe on a wide range of products. The D1 likewise has a built-in smartphone application that can be downloaded and install from the Android Shop or the Apple App Shop. The application can be made use of to import laser layouts from complimentary vector websites, including Etsy. The D1 can likewise be linked to a computer using USB or WiFi. It can likewise move information via Wi-Fi or a large ability TF card.
The D1 is capable of etching on Poplar plywood, which is one of the most commonly used timbers for laser cutters. The D1 can likewise reduce on other woods, including tough maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm array. It can likewise refine materials up to 10mm thick, which means that it has the ability to engrave on a variety of products. The D1 is made for both residence and also business use.
The XTool D1 comes in two designs: the 20W variation as well as the 5W design. The 20W version has a larger laser head, and a smaller sized working location. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster machine. 6040 Laser Cutting Machine
The D1 features a steel framework, which gives maximum stability and longevity. It likewise has a synchronous belt to improve motion accuracy. The belt’s moderate stress is required for accuracy, particularly when relocating at high speeds. The synchronous belt can also assist the equipment remain steady as well as lessen vibration. It can likewise remove the motion space, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an excellent option for mostly all inscribing tasks. Its style is risk-free and trusted. It is perfect for local business and also enthusiasts.
It can engrave various sorts of steel and wood. It has the ability to cut eight to tenmm plywood in one pass. It likewise has the ability to reduce leather and also polymer.
It features a variety of devices. You can get the bundle pack that consists of the Air Assist Set and also Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can likewise get a 1064nm laser head. This head reduces burn marks in plastic and also is especially helpful for delicate jewelry designs. It additionally has a movement sensing unit as well as flame detection sensing unit.
It also includes an emergency quit switch. It can be managed via Wi-fi and also can import laser styles from free vector websites like Etsy. You can additionally control it through the Makeblock XTool D1 application on Android and also iphone.
It has a great focus device. The laser crosshairs move as needed and also transfer to the framework of the artwork. This makes the engraving very exact. It can also be used to produce a thickening effect, which can be useful when etching large things.
The XTool D1 Pro has boosted features as well as laser power. It uses a 20W laser component to create a beam that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a higher speed. It can reach inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this machine is extremely creative. Next to the laser module, there is a swivelling arm which you take out when you wish to concentrate the laser. It assures that you drop the directly the correct distance from the material. After that you tighten the thumb screw as well as pivot the arm back up. 6040 Laser Cutting Machine
XTool D1 Special Features
Below are a few of the leading Special Attributes of the XTool D1:
Wireless Connection
Machine can be linked by means of USB or a Wi-fi. And also you can also regulate with a smart device application on Android or iOS.
Trimming as well as Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The machine can reduce timber, specifically Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would avoid some plastics like PVC as well as vinyl since it launches hydrogen chloride gas while being reduced. This gas is poisonous and also extremely corrosive (your maker will certainly rust quickly).
We have actually tested the device with engraving and cutting various materials. You will certainly find the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other devices. This should allow for more accuracy and much less mechanical wobble when engraving at broadband. 6040 Laser Cutting Machine
Advanced Stepper Motor Drivers
The equipment has an extremely advanced controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. In this manner the electric motors are really exact and quiet. The drivers additionally support homing treatment without making use of restriction switches as the vehicle drivers gauge current with electric motors and discover the limit by doing this. This is why this maker does not need physical limitation switches for homing.
The maker has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device instantly quits if an unintentional touch occurs. This is fantastic for people who are concerned concerning safety. The device is likewise compatible with Windows and Mac OS systems.
The XTool D1 software program is really easy to use. As soon as you have the art work prepared, you can use the app to set up the laser. You can also customize the laser setups as well as produce personalized art work. The application likewise includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can engrave over 100 products. The laser engraver tool is easy to use and features a protective cover. The maker has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is a really functional inscribing machine. It cam be utilized to etch on all kinds of products/.
Here is a list of materials and attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out equipment. Specific, rapid and also solidly constructed. It comes with a premium price, but it deserves it for somebody that wants a good as well as practically a commercial quality table top laser engraver capable of fast cutting and exact inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as cutting device on our list is XTool D1 pro, the very best alternative to Glowforge. It is in first place due to the fact that it has received the Red Dot Design 2022 Honor. The impressive style and also modern technology set this machine aside from various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and also XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce as well as inscribe a significant range of materials, from something as slim as cells paper to something as thick as leather and wood panels.
XTool D1 is a diode laser engraving and reducing device that is compatible with a large range of materials, including different kinds of timber. Its effective as well as very focused laser can conveniently cut and also inscribed timber with supreme precision as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is particularly produced steel and also plastic engraving. It can etch various metals, including light weight aluminum and also rare-earth elements. It can also do colored etching on numerous steels, including light weight aluminum.