What is the Makeblock XTool D1? A Small Engraving Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. A Small Engraving Machine
The company was established in 2012 by Jasen Wang, who examined airplane design at Northwestern Polytechnic University. The company is committed to creating innovative products to assist individuals reveal themselves with creation. Since its development, Makeblock has actually launched a number of educational robots, as well as a coding platform for youngsters. It likewise launched the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can reducing and engraving a range of products. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, as well as can be utilized for several tasks. In addition to engraving, the D1 can additionally be utilized for other tasks, including producing fashion jewelry and also light tones.
The D1 is a DIY package that can be put together in just about half an hour. Its unit is foldable, allowing for easy transportability and also efficient air flow. It is likewise constructed from flame-retardant polyester, making it secure from dirt particles. The enclosure likewise shields the functioning surface under the machine.
The XTool D1 is geared up with a laser component that can engrave on steels as well as lots of various other materials. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This permits finer engraving and also higher precision.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to inscribe on a variety of products. The D1 likewise has a built-in smartphone application that can be downloaded and install from the Android Store or the Apple App Shop. The app can be used to import laser styles from totally free vector websites, including Etsy. The D1 can also be connected to a computer system via USB or WiFi. It can likewise transfer data using Wi-Fi or a large capability TF card.
The D1 can etching on Poplar plywood, which is one of one of the most commonly made use of timbers for laser cutters. The D1 can additionally reduce on other woods, including difficult maple, walnut, and rosewood. Its laser head is adjustable, permitting a 50mm variety. It can additionally process products as much as 10mm thick, which means that it has the ability to inscribe on a variety of materials. The D1 is developed for both home as well as business usage.
The XTool D1 can be found in 2 models: the 20W version as well as the 5W version. The 20W variation has a bigger laser head, as well as a smaller sized working location. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker device. A Small Engraving Machine
The D1 includes a steel framework, which offers maximum security as well as longevity. It likewise has a simultaneous belt to improve motion precision. The belt’s moderate tension is needed for precision, specifically when relocating at high speeds. The simultaneous belt can likewise aid the equipment stay steady and minimize vibration. It can likewise remove the motion space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it an excellent choice for nearly all inscribing jobs. Its layout is safe and trusted. It is excellent for small businesses as well as enthusiasts.
It can engrave various kinds of steel and wood. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the ability to reduce leather and polymer.
It comes with a variety of devices. You can purchase the package pack that consists of the Air Assist Set as well as Honeycomb Working Panel. It costs $119 and $269, specifically. You can also obtain a 1064nm laser head. This head decreases melt marks in plastic as well as is specifically useful for delicate fashion jewelry styles. It additionally has an activity sensor and also flame detection sensor.
It likewise includes an emergency situation quit button. It can be regulated through Wi-fi as well as can import laser layouts from free vector sites like Etsy. You can also control it using the Makeblock XTool D1 app on Android as well as iOS.
It has a very good emphasis system. The laser crosshairs relocate as required and relocate to the framework of the artwork. This makes the engraving extremely exact. It can additionally be utilized to create a thickening impact, which can be helpful when inscribing large things.
The XTool D1 Pro has actually boosted attributes and laser power. It makes use of a 20W laser module to create a beam that cuts objects in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a greater speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is extremely creative. Next to the laser module, there is a rotating arm which you take out when you wish to focus the laser. It guarantees that you go down the head on the proper distance from the product. Then you tighten up the thumb screw as well as pivot the arm back up. A Small Engraving Machine
XTool D1 Special Features
Below are several of the top Special Features of the XTool D1:
Wireless Connection
Equipment can be connected via USB or a Wi-fi. And you can additionally control with a mobile phone app on Android or iOS.
Trimming and also Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would stay clear of some plastics like PVC and vinyl because it releases hydrogen chloride gas while being cut. This gas is harmful and very destructive (your maker will certainly rust swiftly).
We have actually examined the maker with inscription and also cutting various products. You will discover the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other makers. This should permit more precision and much less mechanical wobble when engraving at high speeds. A Small Engraving Machine
Advanced Stepper Electric Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. By doing this the motors are really accurate and quiet. The chauffeurs likewise support homing treatment without using limitation changes as the drivers determine present with motors as well as discover the limit this way. This is why this maker does not require physical limit changes for homing.
The device has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver tool automatically stops if an unintended touch occurs. This is wonderful for people that are concerned regarding safety and security. The tool is also compatible with Windows and Mac OS systems.
The XTool D1 software program is very easy to use. Once you have the art work prepared, you can make use of the app to establish the laser. You can also personalize the laser setups and also create customized art work. The app also includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can engrave over 100 products. The laser engraver device is easy to use and includes a protective cover. The equipment has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a very flexible etching machine. It cam be utilized to engrave on all kinds of products/.
Here is a listing of materials and attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out machine. Exact, fast as well as sturdily developed. It comes at a premium price, but it deserves it for somebody that wants a good as well as almost a commercial quality table top laser engraver efficient in rapid cutting and exact inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving and also cutting maker on our checklist is XTool D1 pro, the best choice to Glowforge. It is in first place due to the fact that it has obtained the Red Dot Layout 2022 Award. The impressive design and also advanced innovation established this device besides various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can reduce and also engrave a massive range of materials, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser engraving and cutting equipment that works with a wide range of products, including various types of wood. Its powerful and highly concentrated laser can conveniently cut and inscribed wood with best accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is particularly produced steel as well as plastic engraving. It can etch numerous metals, consisting of light weight aluminum and rare-earth elements. It can additionally do colored etching on different steels, including light weight aluminum.