What is the Makeblock XTool D1? A2 Laser Cutting Machine Factory
XTool D1 is a laser cutter that has been produced by Makeblock. A2 Laser Cutting Machine Factory
The firm was established in 2012 by Jasen Wang, who examined airplane layout at Northwestern Polytechnic University. The business is committed to creating cutting-edge items to assist individuals express themselves via production. Considering that its development, Makeblock has launched several instructional robotics, in addition to a coding system for youngsters. It likewise introduced the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can cutting and engraving a selection of materials. Its laser can remove intricate shapes much faster than a scroll saw or jigsaw, and also can be made use of for several tasks. In addition to engraving, the D1 can also be made use of for various other tasks, consisting of creating fashion jewelry as well as light tones.
The D1 is a do it yourself set that can be put together in just regarding half a hr. Its enclosure is collapsible, enabling very easy portability and reliable air flow. It is also constructed from flame-retardant polyester, making it risk-free from dust bits. The room additionally shields the working surface under the machine.
The XTool D1 is equipped with a laser module that is capable of engrave on steels as well as numerous various other products. It has an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer inscription and also greater precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to engrave on a wide variety of products. The D1 additionally has a built-in smart device app that can be downloaded from the Android Store or the Apple Application Shop. The app can be utilized to import laser layouts from cost-free vector websites, including Etsy. The D1 can likewise be connected to a computer using USB or WiFi. It can likewise move data using Wi-Fi or a large capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is among the most typically made use of timbers for laser cutters. The D1 can likewise reduce on various other timbers, including difficult maple, walnut, and also rosewood. Its laser head is flexible, permitting a 50mm variety. It can additionally process materials approximately 10mm thick, which indicates that it has the ability to etch on a wide range of products. The D1 is designed for both house as well as service usage.
The XTool D1 can be found in 2 versions: the 20W variation and the 5W version. The 20W version has a bigger laser head, and a smaller sized working area. The 5W version has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster equipment. A2 Laser Cutting Machine Factory
The D1 features a steel framework, which provides optimum security as well as resilience. It also has a concurrent belt to enhance movement accuracy. The belt’s modest stress is needed for precision, particularly when moving at high speeds. The concurrent belt can likewise aid the equipment remain steady and also minimize vibration. It can likewise eliminate the activity space, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It generates clear lines down to 0.06 mm. This makes it a superb choice for mostly all engraving tasks. Its design is safe and also reliable. It is suitable for local business as well as hobbyists.
It can engrave various types of metal as well as timber. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the ability to reduce leather and also acrylic.
It includes a number of accessories. You can get the bundle pack that includes the Air Assist Establish and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head minimizes shed marks in plastic and is particularly beneficial for delicate fashion jewelry styles. It also has a movement sensing unit and flame detection sensing unit.
It additionally features an emergency quit button. It can be managed through Wi-fi and can import laser styles from free vector websites like Etsy. You can also control it using the Makeblock XTool D1 application on Android as well as iphone.
It has an excellent focus device. The laser crosshairs move as required and also transfer to the structure of the artwork. This makes the engraving really specific. It can also be made use of to produce a thickening effect, which can be beneficial when engraving large products.
The XTool D1 Pro has actually boosted attributes and laser power. It uses a 20W laser module to create a beam that cuts objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It likewise has a greater rate. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this equipment is extremely creative. Beside the laser component, there is a rotating arm which you pull out when you intend to concentrate the laser. It assures that you go down the directly the correct distance from the product. After that you tighten up the thumb screw and swivel the arm back up. A2 Laser Cutting Machine Factory
XTool D1 Special Features
Below are several of the top Special Attributes of the XTool D1:
Wireless Connection
Maker can be attached via USB or a WiFi. And also you can additionally control with a smart device app on Android or iphone.
Cutting and also Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly prevent some plastics like PVC and vinyl considering that it launches hydrogen chloride gas while being cut. This gas is toxic and extremely harsh (your equipment will rust quickly).
We have actually checked the maker with engraving and reducing different products. You will certainly locate the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other makers. This should allow for even more accuracy and also much less mechanical wobble when inscribing at high speeds. A2 Laser Cutting Machine Factory
Advanced Stepper Motor Drivers
The maker has a really advanced controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. This way the motors are really exact as well as quiet. The chauffeurs likewise support homing procedure without utilizing restriction switches as the vehicle drivers determine present via electric motors as well as spot the limit this way. This is why this device does not need physical limitation changes for homing.
The equipment has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than having to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver tool automatically stops if an accidental touch happens. This is wonderful for people who are worried concerning security. The tool is also suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have the art work prepared, you can utilize the app to set up the laser. You can likewise personalize the laser settings and develop personalized artwork. The app likewise includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can engrave over 100 materials. The laser engraver device is easy to use and includes a safety cover. The equipment has a guarantee of year.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching device. It cam be utilized to engrave on all types of products/.
Here is a checklist of materials and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered machine. Exact, rapid and also well built. It comes with a premium rate, but it is worth it for somebody that wants a great and virtually a commercial grade table leading laser engraver capable of quick cutting as well as accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription as well as reducing equipment on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in first place due to the fact that it has actually obtained the Red Dot Design 2022 Award. The outstanding design and also modern innovation established this maker besides other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce and engrave a big selection of materials, from something as slim as cells paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser inscription as well as cutting maker that works with a wide variety of materials, consisting of various kinds of timber. Its powerful as well as very concentrated laser can quickly cut as well as inscribed wood with utmost precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is particularly made for metal and plastic inscription. It can inscribe various steels, including light weight aluminum as well as rare-earth elements. It can likewise do colored etching on various steels, consisting of light weight aluminum.
A2 Laser Cutting Machine Factory A2 Laser Cutting Machine Factory