What is the Makeblock XTool D1? Co2 Fiber Laser Cutting Small Machine 60 90
XTool D1 is a laser cutter that has actually been developed by Makeblock. Co2 Fiber Laser Cutting Small Machine 60 90
The firm was developed in 2012 by Jasen Wang, who studied airplane layout at Northwestern Polytechnic University. The company is committed to producing ingenious items to help people reveal themselves through creation. Given that its development, Makeblock has launched a number of educational robotics, in addition to a coding system for kids. It additionally launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can cutting and inscribing a variety of materials. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, and can be made use of for several tasks. In addition to engraving, the D1 can additionally be made use of for various other tasks, including developing jewelry and also light tones.
The D1 is a DIY package that can be constructed in only about half an hour. Its enclosure is collapsible, allowing for easy transportability and also efficient ventilation. It is likewise constructed from flame-retardant polyester, making it safe from dirt particles. The enclosure additionally shields the functioning surface area under the maker.
The XTool D1 is furnished with a laser module that can engrave on steels and numerous various other materials. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving as well as greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to etch on a variety of products. The D1 also has a built-in smart device app that can be downloaded from the Android Shop or the Apple App Shop. The application can be utilized to import laser designs from free vector websites, consisting of Etsy. The D1 can also be connected to a computer system via USB or WiFi. It can likewise transfer data via Wi-Fi or a big capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of one of the most commonly utilized timbers for laser cutters. The D1 can additionally cut on other woods, including tough maple, walnut, and also rosewood. Its laser head is adjustable, enabling a 50mm array. It can also process materials as much as 10mm thick, which indicates that it is able to engrave on a wide range of materials. The D1 is developed for both home and company usage.
The XTool D1 comes in 2 versions: the 20W variation as well as the 5W design. The 20W variation has a bigger laser head, as well as a smaller working area. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster machine. Co2 Fiber Laser Cutting Small Machine 60 90
The D1 features a steel framework, which gives optimum security as well as resilience. It also has a concurrent belt to enhance movement precision. The belt’s moderate tension is required for precision, especially when moving at broadband. The concurrent belt can also assist the device keep secure and also decrease resonance. It can likewise remove the motion space, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It generates clear lines down to 0.06 mm. This makes it an outstanding choice for mostly all etching jobs. Its design is safe and trusted. It is optimal for small companies as well as enthusiasts.
It can etch different sorts of steel and also timber. It has the capacity to reduce eight to tenmm plywood in one pass. It additionally has the capacity to cut leather and also acrylic.
It features a variety of devices. You can get the bundle pack that consists of the Air Assist Set and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can additionally obtain a 1064nm laser head. This head decreases shed marks in plastic and also is specifically valuable for delicate fashion jewelry styles. It likewise has a movement sensor as well as flame discovery sensor.
It also includes an emergency situation quit switch. It can be managed with WiFi and also can import laser styles from free vector websites like Etsy. You can likewise control it using the Makeblock XTool D1 app on Android and also iphone.
It has a great focus system. The laser crosshairs relocate as required and also move to the structure of the art work. This makes the engraving really accurate. It can also be utilized to develop a thickening impact, which can be valuable when engraving big products.
The XTool D1 Pro has improved features and laser power. It makes use of a 20W laser component to develop a beam of light that cuts things in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It additionally has a greater speed. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is extremely smart. Beside the laser module, there is a swivelling arm which you take out when you wish to concentrate the laser. It assures that you go down the directly the right range from the material. Then you tighten up the thumb screw and rotate the arm back up. Co2 Fiber Laser Cutting Small Machine 60 90
XTool D1 Special Features
Below are several of the top Unique Features of the XTool D1:
Wireless Connectivity
Machine can be linked via USB or a WiFi. And also you can also control with a smart device application on Android or iOS.
Trimming and Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The maker can cut wood, specifically Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would avoid some plastics like PVC and also plastic considering that it releases hydrogen chloride gas while being reduced. This gas is toxic and also really harsh (your maker will rust swiftly).
We have actually examined the equipment with inscription as well as reducing various materials. You will find the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other devices. This must enable more accuracy as well as much less mechanical wobble when etching at broadband. Co2 Fiber Laser Cutting Small Machine 60 90
Advanced Stepper Electric Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. By doing this the motors are very specific as well as quiet. The vehicle drivers likewise support homing treatment without utilizing limit switches over as the vehicle drivers determine current via motors and also identify the limit by doing this. This is why this equipment does not require physical limitation changes for homing.
The device has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to separate among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled through Wi-Fi or USB. The laser engraver device automatically stops if an unexpected touch happens. This is excellent for individuals who are concerned concerning security. The device is likewise suitable with Windows and also Mac OS systems.
The XTool D1 software application is very easy to use. Once you have the artwork prepared, you can use the application to establish the laser. You can likewise customize the laser setups and produce custom-made art work. The app additionally consists of a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can etch over 100 products. The laser engraver device is easy to use as well as comes with a protective cover. The machine has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving equipment. It cam be utilized to inscribe on all sorts of products/.
Right here is a checklist of products and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out machine. Precise, rapid and also solidly built. It comes at a costs price, however it deserves it for someone that wants an excellent as well as almost a commercial grade table top laser engraver efficient in fast cutting as well as exact engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as cutting maker on our listing is XTool D1 pro, the very best choice to Glowforge. It is in first place due to the fact that it has obtained the Red Dot Design 2022 Award. The superior style as well as modern innovation set this equipment apart from other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and etch a significant variety of products, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser engraving as well as cutting maker that is compatible with a vast array of materials, including different sorts of timber. Its powerful and also very concentrated laser can quickly cut and also inscribed timber with utmost precision and also precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is particularly made for steel and also plastic engraving. It can etch various metals, including aluminum and also rare-earth elements. It can also do tinted engraving on numerous metals, including light weight aluminum.
Co2 Fiber Laser Cutting Small Machine 60 90 Co2 Fiber Laser Cutting Small Machine 60 90