What is the Makeblock XTool D1? Construction Material Laser Cutting Machine
XTool D1 is a laser cutter that has actually been produced by Makeblock. Construction Material Laser Cutting Machine
The firm was established in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic University. The company is committed to creating ingenious items to help individuals share themselves with development. Since its creation, Makeblock has actually launched several instructional robotics, in addition to a coding platform for children. It additionally launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing and also inscribing a selection of products. Its laser can remove intricate shapes much faster than a scroll saw or jigsaw, as well as can be made use of for various tasks. In addition to engraving, the D1 can also be utilized for other tasks, consisting of producing fashion jewelry and light tones.
The D1 is a DIY kit that can be set up in only regarding half an hour. Its unit is collapsible, enabling simple mobility as well as effective air flow. It is additionally constructed from flame-retardant polyester, making it risk-free from dust bits. The unit likewise secures the working surface under the equipment.
The XTool D1 is outfitted with a laser component that can engrave on steels and several various other products. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This enables finer engraving as well as higher precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to etch on a wide range of products. The D1 likewise has an integrated smartphone app that can be downloaded and install from the Android Store or the Apple Application Shop. The app can be made use of to import laser styles from totally free vector sites, consisting of Etsy. The D1 can also be connected to a computer system by means of USB or WiFi. It can additionally transfer information using Wi-Fi or a large capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of the most typically made use of woods for laser cutters. The D1 can likewise cut on various other woods, including hard maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can likewise refine materials up to 10mm thick, which indicates that it is able to etch on a variety of materials. The D1 is designed for both home as well as service use.
The XTool D1 comes in two designs: the 20W version and also the 5W version. The 20W version has a bigger laser head, and a smaller sized working location. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker device. Construction Material Laser Cutting Machine
The D1 includes a steel framework, which offers maximum security and also toughness. It additionally has a concurrent belt to improve movement precision. The belt’s modest stress is required for precision, particularly when relocating at high speeds. The simultaneous belt can also assist the machine keep stable and reduce resonance. It can additionally get rid of the activity void, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it a superb selection for nearly all engraving jobs. Its design is safe and reliable. It is perfect for local business and also hobbyists.
It can inscribe different kinds of steel as well as timber. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the capacity to cut leather as well as acrylic.
It features a number of devices. You can get the package pack that includes the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can likewise obtain a 1064nm laser head. This head lowers melt marks in plastic as well as is specifically useful for fragile jewelry designs. It additionally has an activity sensing unit and flame discovery sensor.
It also features an emergency situation quit switch. It can be managed with WiFi and also can import laser designs from free vector sites like Etsy. You can likewise control it using the Makeblock XTool D1 app on Android and also iOS.
It has an excellent emphasis device. The laser crosshairs move as needed as well as move to the frame of the art work. This makes the engraving extremely precise. It can additionally be made use of to develop a thickening effect, which can be beneficial when engraving huge products.
The XTool D1 Pro has actually improved attributes as well as laser power. It makes use of a 20W laser module to produce a beam of light that cuts objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a higher speed. It can reach inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this machine is really smart. Alongside the laser module, there is a rotating arm which you pull out when you intend to concentrate the laser. It assures that you drop the directly the proper range from the product. Then you tighten up the thumb screw and also pivot the arm back up. Construction Material Laser Cutting Machine
XTool D1 Special Features
Below are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Machine can be attached via USB or a WiFi. As well as you can also manage with a mobile phone app on Android or iOS.
Cutting and Inscription Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can reduce wood, particularly Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would prevent some plastics like PVC and vinyl given that it launches hydrogen chloride gas while being cut. This gas is poisonous and extremely destructive (your equipment will certainly corrosion swiftly).
We have examined the machine with inscription and reducing various materials. You will find the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other devices. This need to allow for more accuracy and much less mechanical wobble when engraving at broadband. Construction Material Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The equipment has an extremely innovative controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. By doing this the electric motors are very specific and also quiet. The drivers additionally sustain homing procedure without utilizing limitation changes as the motorists determine current via motors and also spot the limit in this manner. This is why this equipment does not need physical restriction switches for homing.
The maker has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled through Wi-Fi or USB. The laser engraver device instantly quits if an unintended touch happens. This is excellent for people that are concerned regarding safety. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software application is extremely easy to use. Once you have the artwork prepared, you can use the application to establish the laser. You can likewise customize the laser setups and also create personalized art work. The app additionally consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 materials. The laser engraver tool is easy to use as well as features a safety cover. The equipment has a warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching device. It cam be made use of to engrave on all sorts of products/.
Below is a checklist of products as well as features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out device. Accurate, rapid and well constructed. It comes at a premium price, but it deserves it for someone that wants an excellent and virtually a commercial quality table leading laser engraver capable of fast cutting as well as precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and reducing maker on our list is XTool D1 pro, the most effective choice to Glowforge. It is in first place since it has received the Red Dot Design 2022 Honor. The outstanding design and modern modern technology set this maker apart from other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce as well as inscribe a substantial variety of products, from something as slim as tissue paper to something as thick as leather and also wood panels.
XTool D1 is a diode laser engraving and also cutting machine that works with a variety of materials, including different sorts of wood. Its powerful as well as very focused laser can quickly reduce as well as inscribed wood with supreme accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is specifically produced steel and also plastic engraving. It can etch various steels, including light weight aluminum and also rare-earth elements. It can also do tinted inscribing on numerous metals, including aluminum.
Construction Material Laser Cutting Machine Construction Material Laser Cutting Machine