What is the Makeblock XTool D1? Cutting 5mm Plywood On K40 Laser
XTool D1 is a laser cutter that has actually been produced by Makeblock. Cutting 5mm Plywood On K40 Laser
The company was established in 2012 by Jasen Wang, who studied airplane design at Northwestern Polytechnic University. The company is committed to producing cutting-edge items to help people share themselves via production. Because its production, Makeblock has launched numerous educational robots, in addition to a coding platform for kids. It likewise launched the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can cutting and also inscribing a range of materials. Its laser can remove detailed shapes much faster than a scroll saw or jigsaw, and also can be used for various tasks. Along with engraving, the D1 can additionally be made use of for other jobs, including developing fashion jewelry as well as light tones.
The D1 is a DIY kit that can be set up in only regarding half an hour. Its unit is collapsible, permitting very easy transportability and also efficient air flow. It is additionally made from flame-retardant polyester, making it risk-free from dirt particles. The room additionally safeguards the working surface area under the machine.
The XTool D1 is geared up with a laser component that is capable of engrave on steels and also numerous other materials. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This enables finer engraving and also higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to inscribe on a vast array of products. The D1 likewise has a built-in smartphone app that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be made use of to import laser designs from totally free vector sites, consisting of Etsy. The D1 can also be attached to a computer by means of USB or WiFi. It can additionally transfer information using Wi-Fi or a big ability TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most frequently made use of woods for laser cutters. The D1 can likewise reduce on other timbers, consisting of difficult maple, walnut, and also rosewood. Its laser head is flexible, enabling a 50mm range. It can likewise process products approximately 10mm thick, which means that it is able to etch on a wide range of materials. The D1 is made for both home and company usage.
The XTool D1 can be found in 2 designs: the 20W variation and also the 5W version. The 20W variation has a bigger laser head, and also a smaller sized working area. The 5W design has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker device. Cutting 5mm Plywood On K40 Laser
The D1 features a steel framework, which gives maximum security and also durability. It also has a synchronous belt to improve motion precision. The belt’s moderate tension is required for accuracy, particularly when moving at broadband. The synchronous belt can also aid the machine remain stable and also reduce vibration. It can also remove the motion gap, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an excellent choice for mostly all inscribing tasks. Its design is safe and dependable. It is perfect for small businesses and also hobbyists.
It can inscribe different kinds of steel as well as wood. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the capacity to reduce natural leather as well as polymer.
It comes with a variety of devices. You can get the bundle pack that consists of the Air Assist Set and also Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can additionally obtain a 1064nm laser head. This head decreases burn marks in plastic as well as is particularly valuable for fragile fashion jewelry layouts. It also has a motion sensor as well as fire discovery sensor.
It additionally includes an emergency situation stop button. It can be controlled through WiFi as well as can import laser layouts from cost-free vector websites like Etsy. You can also regulate it through the Makeblock XTool D1 application on Android and also iOS.
It has an excellent focus system. The laser crosshairs move as required and also relocate to the frame of the art work. This makes the engraving very accurate. It can likewise be made use of to produce a thickening impact, which can be beneficial when engraving large products.
The XTool D1 Pro has improved functions and also laser power. It uses a 20W laser module to develop a light beam that cuts things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater rate. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this machine is extremely smart. Alongside the laser component, there is a rotating arm which you take out when you want to focus the laser. It guarantees that you drop the directly the proper distance from the material. After that you tighten up the thumb screw as well as pivot the arm back up. Cutting 5mm Plywood On K40 Laser
XTool D1 Special Features
Here are several of the leading Unique Functions of the XTool D1:
Wireless Connectivity
Device can be linked using USB or a Wi-fi. And also you can likewise regulate with a mobile phone application on Android or iphone.
Cutting and Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The equipment can cut timber, particularly Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and vinyl because it launches hydrogen chloride gas while being cut. This gas is poisonous and also extremely harsh (your device will rust quickly).
We have actually examined the machine with inscription and also reducing different products. You will certainly find the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other devices. This need to enable even more precision and much less mechanical wobble when engraving at high speeds. Cutting 5mm Plywood On K40 Laser
Advanced Stepper Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. In this manner the motors are very specific and quiet. The drivers additionally support homing procedure without utilizing limitation changes as the motorists determine current via motors and also spot the limit in this manner. This is why this maker does not need physical limitation switches over for homing.
The equipment has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis rather than having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch takes place. This is excellent for individuals that are worried concerning security. The device is additionally suitable with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have actually the artwork prepared, you can utilize the application to set up the laser. You can likewise personalize the laser settings as well as create custom artwork. The app also includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can etch over 100 products. The laser engraver device is easy to use and also comes with a safety cover. The machine has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible inscribing machine. It cam be made use of to etch on all kinds of products/.
Here is a listing of products and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered device. Specific, quick as well as sturdily developed. It comes with a premium rate, but it is worth it for someone that wants a great and also practically a commercial quality table top laser engraver efficient in quick cutting as well as exact engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser inscription as well as reducing equipment on our list is XTool D1 pro, the best alternative to Glowforge. It remains in top place since it has actually gotten the Red Dot Style 2022 Award. The impressive layout and state-of-the-art modern technology set this equipment apart from other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and etch a huge variety of products, from something as slim as tissue paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription and also cutting maker that is compatible with a large range of materials, including different kinds of timber. Its effective and also highly focused laser can quickly cut as well as etched wood with ultimate precision and also precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser module, which is particularly made for metal and plastic engraving. It can etch various metals, consisting of light weight aluminum and rare-earth elements. It can also do colored engraving on various steels, consisting of light weight aluminum.
Cutting 5mm Plywood On K40 Laser Cutting 5mm Plywood On K40 Laser