What is the Makeblock XTool D1? Fiber Laser Cutting Machine For Jewelry
XTool D1 is a laser cutter that has actually been developed by Makeblock. Fiber Laser Cutting Machine For Jewelry
The firm was established in 2012 by Jasen Wang, that studied airplane style at Northwestern Polytechnic University. The company is dedicated to developing cutting-edge products to aid individuals share themselves via production. Considering that its production, Makeblock has released numerous educational robots, as well as a coding system for children. It additionally released the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can cutting and also engraving a selection of products. Its laser can cut out complex forms much faster than a scroll saw or jigsaw, and can be used for various jobs. In addition to inscription, the D1 can additionally be used for various other jobs, consisting of developing precious jewelry and light tones.
The D1 is a DIY set that can be assembled in just about half an hour. Its enclosure is collapsible, permitting simple portability as well as effective ventilation. It is also made from flame-retardant polyester, making it safe from dust particles. The unit also safeguards the working surface area under the device.
The XTool D1 is geared up with a laser component that can engrave on steels and several other materials. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving and greater precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to etch on a wide variety of materials. The D1 additionally has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be made use of to import laser designs from complimentary vector sites, including Etsy. The D1 can likewise be attached to a computer system by means of USB or WiFi. It can also transfer data via Wi-Fi or a large ability TF card.
The D1 is capable of etching on Poplar plywood, which is among the most typically utilized timbers for laser cutters. The D1 can additionally cut on other timbers, consisting of tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm variety. It can additionally refine materials as much as 10mm thick, which suggests that it is able to engrave on a wide variety of materials. The D1 is made for both house and also service usage.
The XTool D1 can be found in 2 versions: the 20W variation and also the 5W model. The 20W variation has a bigger laser head, and a smaller sized working area. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker equipment. Fiber Laser Cutting Machine For Jewelry
The D1 features a steel frame, which provides maximum security and longevity. It also has a simultaneous belt to enhance movement precision. The belt’s moderate stress is needed for precision, especially when relocating at broadband. The synchronous belt can also aid the equipment keep steady as well as decrease vibration. It can likewise eliminate the activity space, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it an exceptional choice for nearly all etching jobs. Its design is risk-free as well as reputable. It is ideal for small businesses and also enthusiasts.
It can etch various sorts of steel as well as wood. It has the ability to cut 8 to tenmm plywood in one pass. It likewise has the ability to cut leather and also acrylic.
It features a variety of accessories. You can purchase the bundle pack that consists of the Air Help Set and also Honeycomb Working Panel. It costs $119 and also $269, specifically. You can also obtain a 1064nm laser head. This head minimizes melt marks in plastic as well as is particularly valuable for fragile jewelry layouts. It likewise has an activity sensor and also fire detection sensing unit.
It also includes an emergency quit button. It can be controlled with Wi-fi as well as can import laser layouts from totally free vector websites like Etsy. You can also manage it via the Makeblock XTool D1 app on Android as well as iOS.
It has a very good emphasis mechanism. The laser crosshairs move as needed and move to the frame of the art work. This makes the etching very specific. It can likewise be made use of to produce a thickening impact, which can be valuable when engraving huge things.
The XTool D1 Pro has enhanced features and laser power. It makes use of a 20W laser module to create a beam of light that cuts items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a greater speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is really creative. Alongside the laser component, there is a pivoting arm which you take out when you intend to focus the laser. It assures that you go down the head on the appropriate distance from the material. Then you tighten the thumb screw and swivel the arm back up. Fiber Laser Cutting Machine For Jewelry
XTool D1 Special Features
Right here are some of the leading Special Features of the XTool D1:
Wireless Connectivity
Device can be attached through USB or a WiFi. As well as you can also control with a mobile phone application on Android or iOS.
Cutting and also Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can reduce wood, especially Poplar plywood which is soft and it is the favored wood for all laser cutters.
I would avoid some plastics like PVC and plastic because it launches hydrogen chloride gas while being reduced. This gas is hazardous and also extremely destructive (your maker will certainly corrosion swiftly).
We have actually examined the machine with engraving and also cutting various materials. You will certainly discover the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other machines. This ought to permit even more precision and much less mechanical wobble when etching at high speeds. Fiber Laser Cutting Machine For Jewelry
Advanced Stepper Motor Drivers
The machine has a really advanced controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. This way the motors are really specific and also quiet. The chauffeurs likewise sustain homing procedure without utilizing limitation changes as the drivers gauge existing via motors and find the limit this way. This is why this machine does not require physical restriction switches for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis rather than needing to disconnect one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled through Wi-Fi or USB. The laser engraver device instantly stops if an unintentional touch happens. This is wonderful for people that are concerned regarding safety. The device is also suitable with Windows and also Mac OS systems.
The XTool D1 software application is really easy to use. As soon as you have actually the artwork prepared, you can make use of the app to establish the laser. You can also personalize the laser settings as well as develop custom-made artwork. The app additionally consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 materials. The laser engraver device is easy to use and comes with a safety cover. The machine has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing equipment. It cam be utilized to engrave on all kinds of materials/.
Below is a list of materials and also features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out machine. Exact, quick as well as sturdily built. It comes with a premium price, however it deserves it for a person that desires a good and also practically an industrial quality table top laser engraver with the ability of fast cutting as well as specific inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription and also cutting machine on our list is XTool D1 pro, the best alternative to Glowforge. It remains in starting point because it has actually gotten the Red Dot Style 2022 Award. The superior style and also cutting edge innovation set this maker in addition to other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut as well as etch a massive range of materials, from something as slim as cells paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser engraving and reducing maker that is compatible with a variety of products, including various types of wood. Its effective and also highly focused laser can quickly reduce as well as etched wood with utmost precision as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is especially created steel and also plastic inscription. It can engrave different steels, consisting of aluminum and rare-earth elements. It can additionally do colored inscribing on different steels, consisting of light weight aluminum.
Fiber Laser Cutting Machine For Jewelry Fiber Laser Cutting Machine For Jewelry