What is the Makeblock XTool D1? Fiber Laser Cutting Plate Machine Suppliers
XTool D1 is a laser cutter that has actually been produced by Makeblock. Fiber Laser Cutting Plate Machine Suppliers
The firm was developed in 2012 by Jasen Wang, who studied airplane layout at Northwestern Polytechnic University. The firm is committed to developing ingenious products to aid individuals express themselves through production. Since its development, Makeblock has launched a number of educational robotics, in addition to a coding platform for kids. It also released the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of reducing and engraving a variety of materials. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and can be used for various tasks. In addition to engraving, the D1 can also be made use of for other projects, consisting of producing fashion jewelry and light tones.
The D1 is a DIY kit that can be constructed in only concerning half an hour. Its unit is foldable, permitting very easy portability and also effective air flow. It is likewise made from flame-retardant polyester, making it secure from dirt fragments. The room likewise safeguards the functioning surface area under the device.
The XTool D1 is geared up with a laser component that can engrave on steels and several other materials. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer engraving as well as greater precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to inscribe on a wide variety of materials. The D1 additionally has a built-in mobile phone app that can be downloaded from the Android Shop or the Apple App Shop. The app can be used to import laser layouts from cost-free vector sites, including Etsy. The D1 can also be connected to a computer system through USB or WiFi. It can additionally transfer data by means of Wi-Fi or a large capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most commonly used woods for laser cutters. The D1 can likewise cut on other woods, including hard maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm range. It can additionally refine materials as much as 10mm thick, which implies that it is able to inscribe on a variety of materials. The D1 is developed for both home and service usage.
The XTool D1 can be found in two models: the 20W variation as well as the 5W model. The 20W version has a bigger laser head, and also a smaller working area. The 5W model has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker maker. Fiber Laser Cutting Plate Machine Suppliers
The D1 features a steel structure, which gives optimum stability as well as durability. It additionally has a synchronous belt to boost activity precision. The belt’s moderate tension is required for accuracy, especially when moving at broadband. The synchronous belt can additionally help the maker stay stable and lessen vibration. It can also get rid of the movement space, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an excellent option for almost all etching tasks. Its layout is safe as well as trustworthy. It is suitable for small companies as well as enthusiasts.
It can inscribe various types of steel as well as timber. It has the capability to cut eight to tenmm plywood in one pass. It likewise has the capability to reduce leather and also acrylic.
It includes a variety of devices. You can acquire the bundle pack that includes the Air Help Establish as well as Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can additionally get a 1064nm laser head. This head lowers melt marks in plastic as well as is specifically valuable for delicate precious jewelry styles. It additionally has a movement sensor and flame discovery sensing unit.
It additionally features an emergency stop button. It can be managed through Wi-fi and also can import laser layouts from cost-free vector sites like Etsy. You can likewise control it via the Makeblock XTool D1 application on Android and also iphone.
It has a very good focus mechanism. The laser crosshairs move as needed and move to the framework of the artwork. This makes the engraving extremely accurate. It can additionally be utilized to develop a thickening impact, which can be valuable when etching large things.
The XTool D1 Pro has improved features and laser power. It uses a 20W laser component to create a beam that reduces items in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater speed. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this maker is extremely smart. Alongside the laser module, there is a swivelling arm which you take out when you want to focus the laser. It guarantees that you drop the directly the proper range from the material. Then you tighten up the thumb screw and also pivot the arm back up. Fiber Laser Cutting Plate Machine Suppliers
XTool D1 Special Features
Below are several of the leading Special Functions of the XTool D1:
Wireless Connectivity
Equipment can be linked via USB or a WiFi. And also you can likewise control with a smart device app on Android or iOS.
Cutting and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The maker can cut timber, especially Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would prevent some plastics like PVC and vinyl given that it launches hydrogen chloride gas while being reduced. This gas is toxic and also extremely destructive (your machine will rust promptly).
We have actually tested the maker with engraving and also cutting various products. You will locate the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other equipments. This need to allow for more accuracy as well as much less mechanical wobble when etching at high speeds. Fiber Laser Cutting Plate Machine Suppliers
Advanced Stepper Motor Drivers
The maker has an extremely sophisticated controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are very specific as well as quiet. The vehicle drivers also support homing procedure without using limitation switches over as the vehicle drivers measure existing through electric motors as well as detect the limit in this manner. This is why this machine does not require physical limitation switches for homing.
The equipment has drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver tool instantly stops if an unexpected touch takes place. This is fantastic for people who are worried regarding security. The device is additionally suitable with Windows and also Mac OS systems.
The XTool D1 software application is extremely easy to use. Once you have actually the artwork prepared, you can utilize the application to set up the laser. You can additionally customize the laser settings and also produce customized art work. The app likewise includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can etch over 100 products. The laser engraver tool is easy to use as well as includes a protective cover. The maker has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a really versatile inscribing device. It cam be made use of to engrave on all sorts of materials/.
Right here is a list of products as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered device. Specific, fast as well as solidly built. It comes with a premium cost, however it deserves it for somebody that wants a great and also virtually an industrial quality table top laser engraver efficient in rapid cutting and exact inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving and also reducing equipment on our checklist is XTool D1 pro, the most effective choice to Glowforge. It is in starting point since it has actually gotten the Red Dot Style 2022 Award. The outstanding layout and also state-of-the-art technology set this maker apart from various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and engrave a big range of products, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser engraving and cutting machine that works with a large range of materials, including various types of timber. Its powerful and also highly concentrated laser can easily reduce as well as inscribed wood with ultimate precision as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is especially produced steel and also plastic inscription. It can engrave various steels, including light weight aluminum and also rare-earth elements. It can also do tinted etching on numerous metals, including aluminum.
Fiber Laser Cutting Plate Machine Suppliers Fiber Laser Cutting Plate Machine Suppliers