What is the Makeblock XTool D1? K40 Desktop Diy Wood Laser Engraver
XTool D1 is a laser cutter that has been developed by Makeblock. K40 Desktop Diy Wood Laser Engraver
The business was developed in 2012 by Jasen Wang, who studied aircraft layout at Northwestern Polytechnic University. The business is dedicated to producing innovative products to help people express themselves through production. Considering that its production, Makeblock has actually released several educational robotics, in addition to a coding system for children. It additionally introduced the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting as well as inscribing a selection of products. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, and can be used for various tasks. In addition to engraving, the D1 can also be utilized for other tasks, including producing precious jewelry and also lamp tones.
The D1 is a DIY set that can be put together in just about half an hour. Its enclosure is foldable, enabling very easy transportability as well as effective air flow. It is also constructed from flame-retardant polyester, making it secure from dust bits. The unit also safeguards the working surface under the device.
The XTool D1 is outfitted with a laser component that is capable of engrave on steels and also numerous various other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer inscription as well as higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to inscribe on a variety of products. The D1 also has a built-in smart device app that can be downloaded and install from the Android Store or the Apple App Shop. The app can be used to import laser designs from cost-free vector websites, including Etsy. The D1 can likewise be connected to a computer system through USB or WiFi. It can also transfer information via Wi-Fi or a huge ability TF card.
The D1 can engraving on Poplar plywood, which is just one of one of the most typically made use of timbers for laser cutters. The D1 can likewise cut on various other woods, including hard maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm variety. It can additionally process materials approximately 10mm thick, which means that it is able to engrave on a variety of products. The D1 is made for both house and organization usage.
The XTool D1 can be found in two versions: the 20W variation and also the 5W version. The 20W variation has a larger laser head, as well as a smaller working location. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster machine. K40 Desktop Diy Wood Laser Engraver
The D1 features a steel framework, which gives optimum security and resilience. It additionally has a simultaneous belt to boost motion accuracy. The belt’s modest stress is needed for accuracy, especially when moving at broadband. The simultaneous belt can also help the machine remain stable as well as decrease resonance. It can likewise remove the motion space, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it a superb selection for almost all engraving jobs. Its style is safe and also trusted. It is excellent for small businesses as well as hobbyists.
It can inscribe various sorts of metal and also timber. It has the capacity to cut 8 to tenmm plywood in one pass. It also has the capacity to reduce natural leather and also acrylic.
It includes a variety of devices. You can purchase the bundle pack that includes the Air Assist Set as well as Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally obtain a 1064nm laser head. This head decreases melt marks in plastic as well as is specifically helpful for fragile jewelry layouts. It likewise has a motion sensor as well as fire discovery sensor.
It likewise features an emergency quit switch. It can be controlled with Wi-fi and also can import laser designs from totally free vector sites like Etsy. You can additionally manage it via the Makeblock XTool D1 application on Android and also iphone.
It has a very good focus system. The laser crosshairs relocate as needed as well as transfer to the structure of the art work. This makes the etching really specific. It can likewise be made use of to produce a thickening result, which can be useful when engraving huge things.
The XTool D1 Pro has actually improved functions as well as laser power. It uses a 20W laser module to develop a beam that cuts objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a higher rate. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is very clever. Next to the laser module, there is a rotating arm which you take out when you wish to focus the laser. It ensures that you go down the head on the right distance from the product. Then you tighten up the thumb screw as well as pivot the arm back up. K40 Desktop Diy Wood Laser Engraver
XTool D1 Special Features
Below are a few of the top Special Features of the XTool D1:
Wireless Connectivity
Maker can be connected using USB or a Wi-fi. And you can likewise manage with a mobile phone app on Android or iOS.
Cutting as well as Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is also an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut timber, specifically Poplar plywood which is soft and also it is the recommended timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and also vinyl since it releases hydrogen chloride gas while being reduced. This gas is poisonous and also extremely destructive (your maker will certainly corrosion quickly).
We have evaluated the machine with inscription as well as cutting different materials. You will discover the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other devices. This need to permit more precision as well as less mechanical wobble when etching at broadband. K40 Desktop Diy Wood Laser Engraver
Advanced Stepper Motor Drivers
The maker has an extremely sophisticated controller board. It has Trinamic stepper electric motor drivers which drive the motors with a pure sine wave. This way the electric motors are really precise as well as silent. The motorists additionally support homing procedure without utilizing limit changes as the vehicle drivers determine present through electric motors and discover the limit in this manner. This is why this equipment does not require physical limitation changes for homing.
The maker has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to detach among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver device immediately quits if an accidental touch occurs. This is wonderful for individuals that are worried concerning safety. The device is also suitable with Windows and Mac OS systems.
The XTool D1 software application is extremely easy to use. When you have the artwork prepared, you can use the application to establish the laser. You can likewise personalize the laser setups and create personalized artwork. The application additionally includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver device is easy to use as well as comes with a safety cover. The device has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely versatile engraving equipment. It cam be used to etch on all types of products/.
Below is a list of materials as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Specific, fast as well as solidly constructed. It comes at a costs rate, however it is worth it for somebody that wants a good as well as nearly an industrial grade table top laser engraver capable of rapid cutting and precise inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving and also reducing machine on our list is XTool D1 pro, the very best alternative to Glowforge. It remains in starting point because it has received the Red Dot Layout 2022 Honor. The outstanding design and modern technology established this device aside from other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a massive range of materials, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser engraving as well as reducing device that is compatible with a large range of materials, including different kinds of wood. Its powerful and highly focused laser can easily cut and etched wood with supreme accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is particularly created steel and also plastic engraving. It can engrave different metals, including aluminum as well as precious metals. It can also do tinted engraving on numerous steels, including light weight aluminum.
K40 Desktop Diy Wood Laser Engraver K40 Desktop Diy Wood Laser Engraver