What is the Makeblock XTool D1? K40 Laser Cutter Settings For Different Materials
XTool D1 is a laser cutter that has been produced by Makeblock. K40 Laser Cutter Settings For Different Materials
The company was developed in 2012 by Jasen Wang, who researched aircraft layout at Northwestern Polytechnic College. The business is dedicated to creating cutting-edge products to assist people reveal themselves via production. Considering that its creation, Makeblock has actually released numerous educational robotics, along with a coding system for children. It additionally released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of cutting and also inscribing a selection of materials. Its laser can cut out intricate shapes much faster than a scroll saw or jigsaw, and also can be utilized for many different projects. Along with inscription, the D1 can additionally be made use of for other projects, including producing fashion jewelry as well as lamp tones.
The D1 is a DIY set that can be set up in just about half an hour. Its room is collapsible, allowing for very easy portability as well as efficient ventilation. It is also made from flame-retardant polyester, making it safe from dirt bits. The room likewise secures the working surface under the equipment.
The XTool D1 is equipped with a laser component that can engrave on metals as well as numerous other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving and also higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it possible to etch on a variety of products. The D1 likewise has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be utilized to import laser designs from free vector sites, including Etsy. The D1 can also be connected to a computer system by means of USB or WiFi. It can also move information through Wi-Fi or a big capability TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of one of the most frequently made use of woods for laser cutters. The D1 can additionally reduce on other timbers, consisting of difficult maple, walnut, and rosewood. Its laser head is adjustable, permitting a 50mm variety. It can likewise refine materials approximately 10mm thick, which means that it has the ability to engrave on a wide range of products. The D1 is created for both residence and company usage.
The XTool D1 can be found in 2 versions: the 20W version as well as the 5W version. The 20W version has a larger laser head, and also a smaller working area. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster device. K40 Laser Cutter Settings For Different Materials
The D1 includes a steel framework, which provides maximum security and also resilience. It also has a concurrent belt to boost motion precision. The belt’s moderate tension is needed for accuracy, especially when relocating at broadband. The simultaneous belt can likewise aid the maker keep steady and also lessen vibration. It can additionally remove the motion gap, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it a superb choice for nearly all engraving tasks. Its style is secure as well as reputable. It is suitable for local business as well as hobbyists.
It can inscribe different types of metal as well as wood. It has the ability to cut eight to tenmm plywood in one pass. It likewise has the capability to cut leather as well as polymer.
It comes with a variety of devices. You can get the package pack that consists of the Air Help Set and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise obtain a 1064nm laser head. This head decreases burn marks in plastic and is particularly beneficial for delicate fashion jewelry styles. It likewise has a motion sensing unit and flame detection sensing unit.
It likewise includes an emergency situation stop button. It can be regulated via Wi-fi as well as can import laser styles from free vector websites like Etsy. You can also regulate it via the Makeblock XTool D1 application on Android as well as iOS.
It has a very good emphasis mechanism. The laser crosshairs relocate as required and transfer to the framework of the art work. This makes the etching very exact. It can also be made use of to produce a thickening effect, which can be beneficial when etching big products.
The XTool D1 Pro has improved functions and laser power. It makes use of a 20W laser component to produce a beam that cuts objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a higher speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is very smart. Next to the laser module, there is a pivoting arm which you pull out when you want to concentrate the laser. It assures that you drop the head on the correct range from the product. After that you tighten up the thumb screw as well as pivot the arm back up. K40 Laser Cutter Settings For Different Materials
XTool D1 Special Features
Below are several of the top Special Features of the XTool D1:
Wireless Connectivity
Machine can be connected through USB or a WiFi. As well as you can also regulate with a smartphone application on Android or iOS.
Trimming and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a really capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The maker can reduce wood, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and vinyl since it releases hydrogen chloride gas while being cut. This gas is hazardous and also extremely harsh (your equipment will certainly rust promptly).
We have actually checked the maker with engraving and cutting different materials. You will certainly locate the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other machines. This must enable more accuracy and less mechanical wobble when etching at broadband. K40 Laser Cutter Settings For Different Materials
Advanced Stepper Motor Drivers
The machine has a very sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. By doing this the motors are really exact and quiet. The motorists also sustain homing treatment without making use of restriction changes as the vehicle drivers gauge present with motors and find the limit in this manner. This is why this maker does not need physical limit switches for homing.
The maker has motorists for 3 axis– so you can plug in the roller system as a Z axis instead of needing to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool instantly quits if an unintentional touch occurs. This is terrific for people that are concerned regarding security. The tool is additionally compatible with Windows and Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have the art work prepared, you can make use of the app to set up the laser. You can likewise customize the laser settings and create customized artwork. The app likewise consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 products. The laser engraver tool is easy to use as well as features a protective cover. The machine has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is an extremely functional engraving device. It cam be used to etch on all kinds of materials/.
Here is a listing of materials and attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Exact, fast as well as sturdily built. It comes at a premium price, however it deserves it for someone that wants an excellent as well as almost an industrial grade table top laser engraver capable of fast cutting and also exact engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription as well as reducing device on our listing is XTool D1 pro, the very best option to Glowforge. It remains in first place due to the fact that it has gotten the Red Dot Design 2022 Award. The outstanding design and also advanced innovation established this machine in addition to various other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut as well as engrave a massive range of materials, from something as slim as tissue paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser inscription and reducing device that is compatible with a wide range of products, consisting of different sorts of wood. Its powerful and very concentrated laser can quickly cut and etched timber with supreme precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is especially made for metal and also plastic inscription. It can inscribe numerous steels, including aluminum and also precious metals. It can additionally do tinted inscribing on different metals, consisting of aluminum.
K40 Laser Cutter Settings For Different Materials K40 Laser Cutter Settings For Different Materials