What is the Makeblock XTool D1? Optic Laser Cutting Machine
XTool D1 is a laser cutter that has actually been produced by Makeblock. Optic Laser Cutting Machine
The business was established in 2012 by Jasen Wang, that examined aircraft design at Northwestern Polytechnic College. The business is committed to developing innovative products to assist people share themselves through creation. Considering that its development, Makeblock has actually launched a number of academic robots, along with a coding platform for kids. It also launched the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can cutting and engraving a selection of products. Its laser can cut out complex forms much faster than a scroll saw or jigsaw, as well as can be used for several tasks. Along with engraving, the D1 can additionally be utilized for other jobs, consisting of creating fashion jewelry and lamp shades.
The D1 is a DIY set that can be assembled in just regarding half a hr. Its enclosure is foldable, allowing for simple mobility and efficient ventilation. It is additionally constructed from flame-retardant polyester, making it secure from dirt fragments. The room likewise protects the working surface area under the machine.
The XTool D1 is geared up with a laser module that can engrave on steels and also lots of various other products. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and greater precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to inscribe on a wide variety of materials. The D1 additionally has a built-in smart device application that can be downloaded and install from the Android Shop or the Apple Application Store. The application can be made use of to import laser designs from cost-free vector sites, including Etsy. The D1 can additionally be connected to a computer by means of USB or WiFi. It can additionally move data through Wi-Fi or a large capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most frequently utilized woods for laser cutters. The D1 can likewise cut on other woods, including hard maple, walnut, as well as rosewood. Its laser head is adjustable, enabling a 50mm range. It can also refine materials as much as 10mm thick, which implies that it is able to inscribe on a wide array of materials. The D1 is made for both house and also company use.
The XTool D1 can be found in two versions: the 20W version and also the 5W design. The 20W version has a larger laser head, as well as a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster equipment. Optic Laser Cutting Machine
The D1 features a steel structure, which provides maximum stability as well as resilience. It also has a concurrent belt to improve activity precision. The belt’s moderate stress is needed for precision, especially when relocating at broadband. The concurrent belt can additionally aid the equipment remain steady and also reduce resonance. It can likewise get rid of the motion space, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an excellent option for nearly all engraving jobs. Its layout is secure and also trustworthy. It is suitable for small companies and also enthusiasts.
It can etch different sorts of steel and timber. It has the ability to cut 8 to tenmm plywood in one pass. It additionally has the ability to cut natural leather and also polymer.
It comes with a number of devices. You can get the bundle pack that consists of the Air Help Establish and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head decreases burn marks in plastic and is specifically beneficial for fragile fashion jewelry layouts. It also has a movement sensor as well as fire detection sensing unit.
It also features an emergency situation quit switch. It can be controlled through Wi-fi and can import laser layouts from totally free vector websites like Etsy. You can likewise control it via the Makeblock XTool D1 application on Android and also iphone.
It has a great emphasis system. The laser crosshairs move as required as well as move to the framework of the art work. This makes the engraving extremely accurate. It can additionally be used to produce a thickening result, which can be valuable when inscribing big items.
The XTool D1 Pro has actually enhanced attributes as well as laser power. It makes use of a 20W laser module to develop a beam of light that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It likewise has a greater speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this maker is really brilliant. Alongside the laser component, there is a swivelling arm which you take out when you want to focus the laser. It assures that you go down the directly the right range from the material. After that you tighten the thumb screw as well as swivel the arm back up. Optic Laser Cutting Machine
XTool D1 Special Features
Here are a few of the top Special Attributes of the XTool D1:
Wireless Connectivity
Maker can be attached through USB or a Wi-fi. And you can also regulate with a mobile phone app on Android or iphone.
Cutting as well as Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The maker can cut wood, particularly Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would certainly prevent some plastics like PVC and also plastic considering that it launches hydrogen chloride gas while being cut. This gas is harmful and very destructive (your maker will rust promptly).
We have evaluated the equipment with engraving as well as reducing different products. You will certainly locate the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other equipments. This should allow for more precision as well as less mechanical wobble when etching at high speeds. Optic Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The machine has a really advanced controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. By doing this the motors are extremely specific as well as quiet. The vehicle drivers additionally support homing treatment without using restriction changes as the chauffeurs gauge present with motors and discover the limit this way. This is why this device does not need physical limit switches for homing.
The device has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to disconnect one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver tool immediately quits if an accidental touch happens. This is great for people that are worried about safety and security. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software application is really easy to use. Once you have actually the artwork prepared, you can utilize the application to set up the laser. You can also personalize the laser settings and develop customized artwork. The application additionally consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can etch over 100 products. The laser engraver tool is easy to use and also comes with a protective cover. The equipment has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very functional etching equipment. It cam be used to etch on all types of products/.
Here is a listing of materials as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out maker. Accurate, rapid and also sturdily constructed. It comes with a costs rate, however it deserves it for a person that desires a great as well as practically a commercial quality table top laser engraver with the ability of rapid cutting as well as accurate inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription as well as reducing machine on our list is XTool D1 pro, the most effective choice to Glowforge. It is in top place because it has actually obtained the Red Dot Design 2022 Award. The outstanding style as well as advanced modern technology established this maker besides various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also etch a substantial variety of products, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and cutting device that works with a variety of products, consisting of different kinds of wood. Its powerful as well as highly focused laser can easily cut as well as etched timber with utmost precision and also precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is specifically produced metal as well as plastic inscription. It can etch numerous steels, including light weight aluminum and precious metals. It can also do tinted inscribing on different steels, including light weight aluminum.