What is the Makeblock XTool D1? Phoenix Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Phoenix Engraving Machine
The business was established in 2012 by Jasen Wang, that studied airplane design at Northwestern Polytechnic College. The firm is committed to creating cutting-edge products to aid individuals reveal themselves via creation. Since its development, Makeblock has actually launched numerous academic robotics, as well as a coding system for children. It additionally introduced the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can cutting and also inscribing a range of products. Its laser can remove intricate forms much faster than a scroll saw or jigsaw, as well as can be utilized for several tasks. In addition to inscription, the D1 can likewise be made use of for other jobs, consisting of producing precious jewelry as well as lamp tones.
The D1 is a DIY kit that can be set up in just about half an hour. Its unit is foldable, permitting easy portability and reliable ventilation. It is also constructed from flame-retardant polyester, making it risk-free from dirt fragments. The room additionally secures the working surface under the device.
The XTool D1 is geared up with a laser module that is capable of engrave on steels and also lots of other products. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer engraving and higher precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to engrave on a wide variety of products. The D1 likewise has a built-in mobile phone app that can be downloaded and install from the Android Shop or the Apple Application Store. The application can be utilized to import laser layouts from complimentary vector sites, including Etsy. The D1 can likewise be connected to a computer system through USB or WiFi. It can additionally move information via Wi-Fi or a large capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most frequently used timbers for laser cutters. The D1 can additionally cut on various other woods, including difficult maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm range. It can additionally process products approximately 10mm thick, which implies that it is able to etch on a wide range of materials. The D1 is designed for both residence as well as service use.
The XTool D1 comes in two versions: the 20W variation and the 5W design. The 20W version has a bigger laser head, and also a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster equipment. Phoenix Engraving Machine
The D1 includes a steel structure, which provides optimum stability as well as durability. It additionally has a synchronous belt to enhance movement precision. The belt’s modest tension is required for precision, particularly when relocating at high speeds. The concurrent belt can additionally assist the machine keep stable as well as minimize resonance. It can additionally remove the movement gap, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb choice for nearly all engraving tasks. Its design is risk-free as well as trusted. It is suitable for local business as well as hobbyists.
It can inscribe different types of metal and also wood. It has the capability to reduce 8 to tenmm plywood in one pass. It also has the ability to reduce leather and acrylic.
It comes with a variety of accessories. You can get the package pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can also get a 1064nm laser head. This head decreases burn marks in plastic and also is specifically helpful for fragile jewelry designs. It additionally has an activity sensor and also flame detection sensing unit.
It also features an emergency stop switch. It can be regulated via Wi-fi and can import laser layouts from complimentary vector websites like Etsy. You can likewise control it using the Makeblock XTool D1 application on Android as well as iphone.
It has a great focus device. The laser crosshairs move as required and also relocate to the frame of the artwork. This makes the etching very specific. It can likewise be utilized to create a thickening impact, which can be beneficial when inscribing big things.
The XTool D1 Pro has actually boosted functions as well as laser power. It utilizes a 20W laser component to create a light beam that reduces items in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a higher speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is very smart. Alongside the laser component, there is a rotating arm which you take out when you intend to focus the laser. It assures that you go down the head on the appropriate range from the material. After that you tighten up the thumb screw as well as swivel the arm back up. Phoenix Engraving Machine
XTool D1 Special Features
Below are several of the top Special Attributes of the XTool D1:
Wireless Connection
Maker can be attached using USB or a WiFi. And you can likewise manage with a smart device application on Android or iOS.
Cutting as well as Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The maker can reduce timber, specifically Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would prevent some plastics like PVC as well as plastic given that it releases hydrogen chloride gas while being cut. This gas is toxic and also very corrosive (your equipment will certainly corrosion quickly).
We have actually checked the machine with engraving and also cutting different materials. You will discover the results of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other makers. This must allow for even more accuracy as well as less mechanical wobble when inscribing at high speeds. Phoenix Engraving Machine
Advanced Stepper Motor Drivers
The maker has a really advanced controller board. It has Trinamic stepper motor vehicle drivers which drive the motors with a pure sine wave. In this manner the electric motors are really exact and also quiet. The motorists additionally support homing treatment without utilizing limitation switches over as the drivers determine current through motors as well as detect the limit by doing this. This is why this equipment does not require physical limit switches for homing.
The equipment has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis instead of needing to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled through Wi-Fi or USB. The laser engraver tool immediately quits if an accidental touch happens. This is wonderful for people that are concerned concerning security. The device is additionally suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have the artwork prepared, you can utilize the app to set up the laser. You can likewise personalize the laser setups as well as create custom artwork. The app also includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can inscribe over 100 products. The laser engraver device is easy to use as well as includes a safety cover. The device has a guarantee of year.
XTool D1 Engraving
The XTool D1 is an extremely functional engraving maker. It cam be made use of to inscribe on all kinds of materials/.
Below is a list of materials as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out device. Precise, rapid and solidly built. It comes with a premium rate, but it is worth it for a person that wants an excellent as well as practically an industrial grade table top laser engraver capable of fast cutting as well as accurate engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The first laser engraving as well as cutting machine on our listing is XTool D1 pro, the most effective option to Glowforge. It remains in starting point due to the fact that it has actually gotten the Red Dot Style 2022 Award. The superior layout and state-of-the-art technology set this maker in addition to other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and inscribe a big variety of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving and reducing device that is compatible with a large range of products, including different kinds of timber. Its effective and also extremely focused laser can conveniently reduce and inscribed wood with utmost precision and precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is particularly created metal and plastic engraving. It can etch different metals, consisting of aluminum and precious metals. It can also do tinted inscribing on various steels, including light weight aluminum.