What is the Makeblock XTool D1? Stencil Fiber Laser Cutting Machine
XTool D1 is a laser cutter that has been created by Makeblock. Stencil Fiber Laser Cutting Machine
The business was developed in 2012 by Jasen Wang, who studied airplane layout at Northwestern Polytechnic University. The company is committed to developing cutting-edge products to aid individuals express themselves through creation. Given that its development, Makeblock has launched a number of educational robots, in addition to a coding platform for kids. It also released the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that can reducing and also engraving a range of materials. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, as well as can be made use of for several projects. In addition to engraving, the D1 can likewise be made use of for other projects, including developing precious jewelry and also light shades.
The D1 is a do it yourself package that can be assembled in just concerning half a hr. Its unit is foldable, permitting simple transportability and reliable air flow. It is additionally made from flame-retardant polyester, making it risk-free from dust bits. The room additionally protects the functioning surface under the machine.
The XTool D1 is outfitted with a laser module that can engrave on metals and several other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This enables finer engraving as well as greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to inscribe on a vast array of products. The D1 additionally has a built-in smartphone application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be made use of to import laser designs from totally free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer by means of USB or WiFi. It can additionally transfer data using Wi-Fi or a huge capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most typically made use of woods for laser cutters. The D1 can additionally reduce on other timbers, including hard maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can additionally refine materials approximately 10mm thick, which implies that it has the ability to inscribe on a wide range of materials. The D1 is made for both residence and service use.
The XTool D1 is available in two versions: the 20W version as well as the 5W design. The 20W version has a bigger laser head, and also a smaller working area. The 5W design has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker machine. Stencil Fiber Laser Cutting Machine
The D1 includes a steel frame, which supplies optimum security and also resilience. It likewise has a concurrent belt to boost motion precision. The belt’s moderate tension is required for precision, particularly when relocating at high speeds. The simultaneous belt can additionally aid the machine remain secure and decrease resonance. It can likewise get rid of the motion void, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It creates clear lines down to 0.06 mm. This makes it an outstanding choice for mostly all inscribing tasks. Its layout is secure as well as trusted. It is ideal for local business and also enthusiasts.
It can etch different types of steel and wood. It has the capability to reduce 8 to tenmm plywood in one pass. It additionally has the capability to reduce natural leather and also acrylic.
It comes with a number of devices. You can acquire the package pack that includes the Air Assist Set and also Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can likewise obtain a 1064nm laser head. This head reduces burn marks in plastic as well as is particularly beneficial for fragile precious jewelry designs. It likewise has a movement sensing unit and also flame discovery sensing unit.
It also features an emergency stop switch. It can be managed with Wi-fi as well as can import laser styles from free vector websites like Etsy. You can likewise control it by means of the Makeblock XTool D1 application on Android and also iOS.
It has an excellent emphasis device. The laser crosshairs relocate as required as well as move to the frame of the art work. This makes the inscribing extremely specific. It can also be utilized to create a thickening result, which can be useful when engraving huge products.
The XTool D1 Pro has boosted attributes and laser power. It utilizes a 20W laser module to create a light beam that cuts objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It likewise has a higher rate. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is really clever. Alongside the laser component, there is a swivelling arm which you pull out when you wish to concentrate the laser. It guarantees that you go down the head on the correct distance from the material. Then you tighten the thumb screw and pivot the arm back up. Stencil Fiber Laser Cutting Machine
XTool D1 Special Features
Right here are some of the leading Unique Features of the XTool D1:
Wireless Connectivity
Equipment can be attached by means of USB or a Wi-fi. And also you can likewise regulate with a mobile phone application on Android or iphone.
Trimming and Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut timber, especially Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would certainly prevent some plastics like PVC and also vinyl since it releases hydrogen chloride gas while being reduced. This gas is poisonous and also extremely destructive (your device will rust quickly).
We have actually checked the equipment with inscription and reducing different materials. You will certainly locate the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other machines. This must permit more precision and also less mechanical wobble when engraving at high speeds. Stencil Fiber Laser Cutting Machine
Advanced Stepper Motor Drivers
The maker has an extremely advanced controller board. It has Trinamic stepper motor vehicle drivers which drive the motors with a pure sine wave. This way the motors are really exact and quiet. The chauffeurs additionally sustain homing treatment without making use of limit switches over as the motorists determine existing through motors as well as spot the limit this way. This is why this equipment does not need physical limitation switches for homing.
The machine has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than having to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool immediately stops if an accidental touch happens. This is wonderful for people that are concerned regarding safety and security. The device is additionally compatible with Windows and also Mac OS systems.
The XTool D1 software application is extremely easy to use. As soon as you have actually the artwork prepared, you can use the app to set up the laser. You can also tailor the laser settings and also produce personalized art work. The app also includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can inscribe over 100 products. The laser engraver tool is easy to use and comes with a safety cover. The equipment has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing device. It cam be utilized to engrave on all types of products/.
Right here is a listing of materials and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered device. Accurate, rapid and well built. It comes at a costs rate, but it deserves it for someone that desires an excellent as well as practically an industrial quality table top laser engraver capable of quick cutting and exact engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The first laser engraving and cutting device on our list is XTool D1 pro, the very best option to Glowforge. It remains in top place due to the fact that it has actually gotten the Red Dot Style 2022 Honor. The exceptional design and state-of-the-art modern technology set this maker aside from various other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a huge selection of materials, from something as slim as tissue paper to something as thick as leather and wood panels.
XTool D1 is a diode laser inscription and also reducing equipment that works with a large range of products, including different kinds of timber. Its powerful and extremely focused laser can easily cut as well as engraved timber with utmost precision and accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is specifically made for steel and plastic inscription. It can etch numerous steels, including light weight aluminum and also precious metals. It can additionally do tinted etching on different metals, including light weight aluminum.
Stencil Fiber Laser Cutting Machine Stencil Fiber Laser Cutting Machine