What is the Makeblock XTool D1? Step Up From K40 Laser
XTool D1 is a laser cutter that has actually been developed by Makeblock. Step Up From K40 Laser
The company was established in 2012 by Jasen Wang, that researched airplane design at Northwestern Polytechnic University. The company is committed to creating innovative products to aid individuals reveal themselves with creation. Given that its development, Makeblock has launched several instructional robotics, along with a coding platform for children. It additionally launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can reducing and etching a selection of materials. Its laser can remove intricate forms much faster than a scroll saw or jigsaw, as well as can be made use of for many different jobs. In addition to inscription, the D1 can additionally be used for other tasks, consisting of producing precious jewelry and also lamp shades.
The D1 is a DIY kit that can be put together in just concerning half an hour. Its enclosure is foldable, allowing for simple mobility and reliable ventilation. It is additionally constructed from flame-retardant polyester, making it secure from dust fragments. The enclosure also protects the working surface area under the machine.
The XTool D1 is equipped with a laser module that can engrave on metals and several various other materials. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This permits finer engraving and higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it possible to engrave on a wide range of materials. The D1 likewise has an integrated smart device app that can be downloaded from the Android Store or the Apple App Store. The application can be made use of to import laser styles from cost-free vector websites, consisting of Etsy. The D1 can additionally be attached to a computer system via USB or WiFi. It can likewise transfer data using Wi-Fi or a huge capability TF card.
The D1 can inscribing on Poplar plywood, which is among the most frequently made use of timbers for laser cutters. The D1 can also reduce on other woods, consisting of tough maple, walnut, as well as rosewood. Its laser head is adjustable, enabling a 50mm variety. It can also refine materials approximately 10mm thick, which suggests that it is able to etch on a wide array of products. The D1 is created for both home and also organization use.
The XTool D1 is available in two versions: the 20W variation and also the 5W version. The 20W variation has a larger laser head, and also a smaller sized working area. The 5W model has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster maker. Step Up From K40 Laser
The D1 features a steel frame, which supplies optimum security and also toughness. It likewise has a synchronous belt to boost movement precision. The belt’s moderate stress is required for accuracy, particularly when relocating at broadband. The concurrent belt can likewise help the device stay steady and also minimize resonance. It can likewise eliminate the motion space, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it a superb selection for mostly all engraving tasks. Its layout is risk-free as well as reputable. It is suitable for small companies and hobbyists.
It can etch different types of metal and wood. It has the capability to cut eight to tenmm plywood in one pass. It additionally has the capability to reduce natural leather and also acrylic.
It includes a number of devices. You can buy the package pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can likewise obtain a 1064nm laser head. This head decreases shed marks in plastic as well as is specifically valuable for fragile jewelry layouts. It additionally has an activity sensing unit and fire discovery sensing unit.
It also features an emergency situation stop button. It can be controlled through Wi-fi and can import laser styles from totally free vector websites like Etsy. You can also control it by means of the Makeblock XTool D1 application on Android as well as iOS.
It has a great emphasis device. The laser crosshairs relocate as needed and also move to the structure of the art work. This makes the engraving really precise. It can additionally be used to create a thickening impact, which can be valuable when engraving big things.
The XTool D1 Pro has improved functions as well as laser power. It uses a 20W laser module to produce a light beam that reduces things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very clever. Next to the laser module, there is a pivoting arm which you take out when you wish to focus the laser. It assures that you go down the head on the correct range from the product. After that you tighten up the thumb screw as well as swivel the arm back up. Step Up From K40 Laser
XTool D1 Special Features
Here are a few of the leading Special Features of the XTool D1:
Wireless Connection
Maker can be linked via USB or a Wi-fi. As well as you can likewise manage with a mobile phone application on Android or iOS.
Trimming and Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The maker can reduce timber, specifically Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would certainly avoid some plastics like PVC as well as plastic given that it releases hydrogen chloride gas while being cut. This gas is toxic and very corrosive (your equipment will certainly rust promptly).
We have evaluated the equipment with inscription and cutting various products. You will certainly locate the outcomes of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other makers. This ought to enable more precision and also much less mechanical wobble when engraving at high speeds. Step Up From K40 Laser
Advanced Stepper Electric Motor Drivers
The maker has an extremely advanced controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. This way the electric motors are really exact and silent. The motorists additionally sustain homing procedure without making use of limit changes as the chauffeurs measure current via motors and also discover the limit this way. This is why this maker does not require physical limit switches over for homing.
The maker has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis rather than having to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver tool automatically stops if an unexpected touch happens. This is terrific for people that are worried regarding security. The device is additionally suitable with Windows and also Mac OS systems.
The XTool D1 software application is really easy to use. When you have actually the art work prepared, you can use the app to set up the laser. You can additionally tailor the laser settings and create personalized art work. The app likewise consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 products. The laser engraver tool is easy to use and also comes with a safety cover. The maker has a warranty of one year.
XTool D1 Engraving
The XTool D1 is an extremely flexible etching machine. It cam be utilized to engrave on all sorts of products/.
Right here is a list of products and also attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out maker. Precise, rapid and also sturdily built. It comes at a costs price, yet it deserves it for somebody that wants a great as well as practically an industrial quality table leading laser engraver with the ability of rapid cutting as well as precise engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and also reducing device on our listing is XTool D1 pro, the best option to Glowforge. It remains in first place because it has actually obtained the Red Dot Style 2022 Honor. The outstanding layout and state-of-the-art modern technology established this device besides other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and inscribe a huge variety of materials, from something as slim as cells paper to something as thick as natural leather as well as timber panels.
XTool D1 is a diode laser inscription and also reducing machine that is compatible with a wide range of products, including different types of wood. Its powerful and also very focused laser can easily reduce and engraved timber with best accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is particularly produced metal and plastic engraving. It can inscribe numerous steels, consisting of light weight aluminum and also rare-earth elements. It can additionally do colored engraving on different metals, including aluminum.