What is the Makeblock XTool D1? Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist
XTool D1 is a laser cutter that has been created by Makeblock. Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist
The firm was established in 2012 by Jasen Wang, that researched airplane layout at Northwestern Polytechnic University. The firm is devoted to creating cutting-edge items to assist individuals reveal themselves with creation. Considering that its creation, Makeblock has actually launched numerous academic robots, in addition to a coding system for children. It likewise introduced the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as engraving a selection of products. Its laser can cut out detailed shapes much faster than a scroll saw or jigsaw, as well as can be used for many different projects. Along with inscription, the D1 can likewise be made use of for other tasks, consisting of producing fashion jewelry and also light shades.
The D1 is a DIY set that can be constructed in just about half an hour. Its unit is foldable, enabling simple transportability as well as efficient ventilation. It is additionally constructed from flame-retardant polyester, making it safe from dust fragments. The enclosure additionally secures the functioning surface under the equipment.
The XTool D1 is furnished with a laser component that can engrave on metals as well as several various other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving as well as higher precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide variety of products. The D1 likewise has an integrated smart device application that can be downloaded from the Android Shop or the Apple App Store. The app can be made use of to import laser styles from complimentary vector sites, consisting of Etsy. The D1 can also be attached to a computer system via USB or WiFi. It can additionally transfer data by means of Wi-Fi or a large capacity TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most frequently made use of timbers for laser cutters. The D1 can likewise cut on various other timbers, including hard maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm array. It can likewise refine products approximately 10mm thick, which suggests that it has the ability to etch on a variety of materials. The D1 is created for both house and organization usage.
The XTool D1 can be found in two models: the 20W variation as well as the 5W version. The 20W version has a larger laser head, and a smaller sized working area. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster equipment. Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist
The D1 includes a steel framework, which provides optimum stability and also resilience. It also has a concurrent belt to improve activity precision. The belt’s moderate stress is needed for accuracy, particularly when relocating at broadband. The synchronous belt can likewise help the device keep steady and also lessen resonance. It can likewise get rid of the movement space, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it a superb choice for almost all engraving tasks. Its layout is secure and also reliable. It is ideal for small businesses and enthusiasts.
It can engrave different types of metal as well as timber. It has the capacity to reduce 8 to tenmm plywood in one pass. It also has the capability to cut natural leather as well as acrylic.
It includes a number of accessories. You can buy the package pack that includes the Air Help Set as well as Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can additionally obtain a 1064nm laser head. This head decreases melt marks in plastic and also is specifically valuable for fragile precious jewelry styles. It also has a movement sensing unit as well as flame detection sensing unit.
It additionally features an emergency stop button. It can be regulated with WiFi and can import laser designs from free vector sites like Etsy. You can likewise control it by means of the Makeblock XTool D1 app on Android as well as iOS.
It has an excellent focus mechanism. The laser crosshairs move as required and also move to the framework of the art work. This makes the etching really specific. It can also be made use of to create a thickening result, which can be valuable when etching huge things.
The XTool D1 Pro has actually improved features and also laser power. It makes use of a 20W laser module to develop a beam that reduces items in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a higher speed. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is really creative. Next to the laser module, there is a rotating arm which you pull out when you wish to concentrate the laser. It assures that you go down the head on the proper distance from the material. After that you tighten the thumb screw and rotate the arm back up. Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist
XTool D1 Special Features
Here are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Machine can be connected using USB or a WiFi. And also you can also regulate with a smart device app on Android or iphone.
Cutting and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The maker can cut wood, especially Poplar plywood which is soft and it is the recommended wood for all laser cutters.
I would prevent some plastics like PVC and also plastic since it launches hydrogen chloride gas while being cut. This gas is toxic and very destructive (your equipment will corrosion quickly).
We have evaluated the device with inscription and also cutting different products. You will certainly find the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other machines. This ought to allow for even more precision and also less mechanical wobble when inscribing at high speeds. Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist
Advanced Stepper Electric Motor Drivers
The device has a really sophisticated controller board. It has Trinamic stepper electric motor drivers which drive the electric motors with a pure sine wave. This way the motors are really specific as well as silent. The vehicle drivers additionally sustain homing treatment without using limitation changes as the chauffeurs measure current through motors as well as identify the limit in this manner. This is why this machine does not require physical limit changes for homing.
The equipment has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis instead of needing to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver tool automatically quits if an unexpected touch takes place. This is wonderful for people who are worried about security. The tool is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software application is really easy to use. As soon as you have the art work prepared, you can use the application to set up the laser. You can additionally tailor the laser settings and also produce custom artwork. The app additionally consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can engrave over 100 products. The laser engraver tool is easy to use and also features a safety cover. The device has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is a very functional etching machine. It cam be utilized to inscribe on all sorts of materials/.
Here is a list of materials and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Exact, fast and also sturdily built. It comes with a costs rate, but it is worth it for someone that desires a good and also almost an industrial quality table leading laser engraver capable of rapid cutting as well as accurate inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription and also cutting maker on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in top place due to the fact that it has gotten the Red Dot Design 2022 Award. The impressive style and state-of-the-art technology set this device in addition to various other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, as well as XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as etch a massive selection of materials, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser inscription and reducing machine that is compatible with a wide range of products, including various kinds of timber. Its powerful and also extremely focused laser can easily reduce and inscribed timber with supreme accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is especially produced steel and plastic inscription. It can inscribe numerous steels, consisting of aluminum and also precious metals. It can likewise do colored etching on numerous metals, including light weight aluminum.
Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist Supply Desktop Cylinder Co2 Laser Engraving Machine Pricelist