What is the Makeblock XTool D1? Tabletop Mdf Laser Cutting Machine
XTool D1 is a laser cutter that has actually been produced by Makeblock. Tabletop Mdf Laser Cutting Machine
The company was established in 2012 by Jasen Wang, that researched airplane layout at Northwestern Polytechnic University. The company is devoted to developing innovative products to assist individuals share themselves through development. Since its creation, Makeblock has actually launched several academic robots, in addition to a coding system for youngsters. It likewise launched the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of cutting and also engraving a range of materials. Its laser can remove complex forms much faster than a scroll saw or jigsaw, as well as can be used for several jobs. In addition to inscription, the D1 can additionally be made use of for other tasks, including producing precious jewelry as well as lamp tones.
The D1 is a DIY package that can be constructed in only concerning half an hour. Its room is foldable, enabling simple transportability and reliable ventilation. It is also constructed from flame-retardant polyester, making it safe from dirt particles. The enclosure likewise safeguards the functioning surface under the device.
The XTool D1 is geared up with a laser module that can engrave on metals as well as several various other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and greater precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to etch on a wide range of products. The D1 additionally has an integrated smart device application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be made use of to import laser layouts from free vector websites, consisting of Etsy. The D1 can also be attached to a computer using USB or WiFi. It can likewise transfer data via Wi-Fi or a huge ability TF card.
The D1 is capable of engraving on Poplar plywood, which is among the most frequently made use of woods for laser cutters. The D1 can likewise cut on various other woods, consisting of hard maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm array. It can likewise refine materials up to 10mm thick, which implies that it has the ability to engrave on a wide range of products. The D1 is created for both house and also company usage.
The XTool D1 can be found in two models: the 20W variation and the 5W version. The 20W variation has a larger laser head, as well as a smaller sized working area. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster machine. Tabletop Mdf Laser Cutting Machine
The D1 features a steel structure, which supplies maximum security as well as durability. It likewise has a simultaneous belt to boost motion precision. The belt’s modest tension is required for precision, especially when moving at broadband. The concurrent belt can likewise help the machine stay steady as well as lessen vibration. It can likewise remove the motion gap, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It generates clear lines to 0.06 mm. This makes it an outstanding choice for almost all etching jobs. Its design is safe as well as reputable. It is optimal for local business and hobbyists.
It can etch different types of metal as well as wood. It has the ability to reduce eight to tenmm plywood in one pass. It also has the ability to reduce natural leather as well as acrylic.
It features a variety of devices. You can buy the bundle pack that includes the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can likewise get a 1064nm laser head. This head decreases burn marks in plastic and is especially useful for delicate precious jewelry styles. It likewise has a motion sensor as well as flame discovery sensor.
It also features an emergency situation quit switch. It can be managed through Wi-fi as well as can import laser styles from complimentary vector sites like Etsy. You can additionally regulate it using the Makeblock XTool D1 app on Android as well as iphone.
It has an excellent emphasis system. The laser crosshairs move as needed and also relocate to the structure of the art work. This makes the inscribing very precise. It can likewise be made use of to develop a thickening impact, which can be beneficial when engraving big products.
The XTool D1 Pro has enhanced functions and laser power. It utilizes a 20W laser module to produce a beam of light that cuts objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It likewise has a higher speed. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this machine is really clever. Beside the laser module, there is a rotating arm which you take out when you wish to focus the laser. It guarantees that you go down the directly the proper range from the product. Then you tighten the thumb screw and rotate the arm back up. Tabletop Mdf Laser Cutting Machine
XTool D1 Special Features
Right here are a few of the leading Special Functions of the XTool D1:
Wireless Connectivity
Maker can be attached using USB or a Wi-fi. And also you can also manage with a smart device application on Android or iOS.
Trimming and Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The device can reduce wood, particularly Poplar plywood which is soft and it is the recommended wood for all laser cutters.
I would certainly stay clear of some plastics like PVC and vinyl because it launches hydrogen chloride gas while being cut. This gas is harmful as well as extremely destructive (your device will corrosion quickly).
We have actually evaluated the machine with engraving as well as cutting various products. You will certainly discover the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other makers. This must allow for more precision and also much less mechanical wobble when etching at broadband. Tabletop Mdf Laser Cutting Machine
Advanced Stepper Motor Drivers
The maker has a really innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are really precise and also silent. The motorists also support homing treatment without using limitation switches as the vehicle drivers determine current with motors and also detect the limit this way. This is why this maker does not require physical limit switches for homing.
The equipment has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device automatically stops if an unexpected touch occurs. This is excellent for people who are concerned about safety and security. The tool is additionally suitable with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. When you have actually the art work prepared, you can utilize the app to set up the laser. You can also customize the laser settings and also create custom-made artwork. The app likewise includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can engrave over 100 products. The laser engraver tool is easy to use and also comes with a safety cover. The device has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a very functional engraving device. It cam be utilized to etch on all types of materials/.
Right here is a listing of materials as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered machine. Accurate, quick as well as sturdily constructed. It comes with a premium rate, but it is worth it for a person that wants a great and virtually a commercial grade table leading laser engraver capable of fast cutting and also specific engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The first laser engraving as well as cutting machine on our checklist is XTool D1 pro, the very best alternative to Glowforge. It is in top place due to the fact that it has gotten the Red Dot Layout 2022 Award. The impressive style as well as advanced innovation set this equipment apart from other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, as well as XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and etch a big selection of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser engraving and reducing device that is compatible with a vast array of products, including various types of wood. Its powerful as well as extremely focused laser can conveniently reduce and also inscribed timber with supreme accuracy and precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is especially made for metal and also plastic inscription. It can inscribe various metals, consisting of aluminum and also precious metals. It can likewise do tinted inscribing on various steels, including aluminum.
Tabletop Mdf Laser Cutting Machine Tabletop Mdf Laser Cutting Machine