What is the Makeblock XTool D1? Xtool Dongle
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Dongle
The firm was developed in 2012 by Jasen Wang, that researched aircraft design at Northwestern Polytechnic University. The business is devoted to producing cutting-edge items to assist individuals share themselves with development. Because its creation, Makeblock has actually launched a number of educational robotics, along with a coding platform for children. It likewise introduced the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can reducing and also etching a range of products. Its laser can remove intricate forms much faster than a scroll saw or jigsaw, and can be utilized for various tasks. Along with engraving, the D1 can additionally be utilized for other tasks, consisting of developing precious jewelry and light shades.
The D1 is a DIY set that can be set up in only regarding half a hr. Its room is foldable, allowing for simple transportability as well as efficient air flow. It is additionally made from flame-retardant polyester, making it safe from dust fragments. The unit likewise protects the functioning surface under the maker.
The XTool D1 is outfitted with a laser component that is capable of engrave on metals as well as numerous other products. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This enables finer inscription as well as higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it possible to inscribe on a vast array of materials. The D1 additionally has a built-in smart device app that can be downloaded from the Android Store or the Apple Application Shop. The app can be utilized to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can likewise be connected to a computer through USB or WiFi. It can also transfer information through Wi-Fi or a huge capacity TF card.
The D1 can etching on Poplar plywood, which is one of one of the most generally made use of timbers for laser cutters. The D1 can likewise cut on various other woods, consisting of tough maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm array. It can additionally refine products as much as 10mm thick, which implies that it has the ability to engrave on a wide range of materials. The D1 is made for both home and business use.
The XTool D1 can be found in two designs: the 20W version as well as the 5W model. The 20W variation has a larger laser head, and a smaller working location. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker maker. Xtool Dongle
The D1 includes a steel frame, which supplies maximum security and also toughness. It also has a simultaneous belt to enhance movement precision. The belt’s moderate tension is required for precision, particularly when moving at broadband. The synchronous belt can likewise aid the device keep stable and minimize resonance. It can also get rid of the movement space, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an outstanding selection for nearly all inscribing jobs. Its design is secure and also dependable. It is excellent for small businesses and also hobbyists.
It can inscribe various types of steel as well as wood. It has the capability to cut eight to tenmm plywood in one pass. It additionally has the capability to reduce natural leather and polymer.
It features a variety of devices. You can acquire the bundle pack that includes the Air Assist Establish and Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally get a 1064nm laser head. This head reduces burn marks in plastic as well as is specifically valuable for delicate precious jewelry layouts. It additionally has an activity sensor as well as fire detection sensing unit.
It likewise includes an emergency quit button. It can be controlled with Wi-fi and can import laser designs from free vector sites like Etsy. You can also control it through the Makeblock XTool D1 application on Android and iOS.
It has an excellent focus mechanism. The laser crosshairs move as required as well as relocate to the framework of the art work. This makes the etching very accurate. It can also be utilized to create a thickening effect, which can be valuable when etching large things.
The XTool D1 Pro has actually enhanced functions as well as laser power. It uses a 20W laser module to develop a beam of light that reduces objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a higher speed. It can reach inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this device is very creative. Alongside the laser component, there is a swivelling arm which you pull out when you want to focus the laser. It guarantees that you go down the directly the appropriate distance from the material. After that you tighten the thumb screw as well as swivel the arm back up. Xtool Dongle
XTool D1 Special Features
Below are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Device can be attached through USB or a Wi-fi. As well as you can likewise regulate with a mobile phone app on Android or iOS.
Trimming as well as Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The machine can cut wood, particularly Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would certainly stay clear of some plastics like PVC and also vinyl since it launches hydrogen chloride gas while being cut. This gas is poisonous and also very harsh (your maker will rust swiftly).
We have checked the equipment with inscription as well as reducing different products. You will certainly discover the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all other devices. This need to enable more precision and much less mechanical wobble when etching at broadband. Xtool Dongle
Advanced Stepper Motor Drivers
The maker has a really sophisticated controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. In this manner the motors are extremely precise and also silent. The chauffeurs additionally sustain homing procedure without utilizing restriction changes as the motorists gauge current via electric motors and detect the limit by doing this. This is why this device does not need physical limitation changes for homing.
The device has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis rather than having to disconnect one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed via Wi-Fi or USB. The laser engraver device automatically quits if an accidental touch takes place. This is terrific for individuals that are worried concerning security. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software application is extremely easy to use. When you have actually the art work prepared, you can utilize the app to establish the laser. You can also customize the laser setups and also develop custom art work. The app additionally includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can engrave over 100 materials. The laser engraver tool is easy to use and includes a safety cover. The maker has a service warranty of year.
XTool D1 Engraving
The XTool D1 is a very flexible etching equipment. It cam be utilized to inscribe on all kinds of materials/.
Here is a checklist of materials and also attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered machine. Precise, rapid and also well constructed. It comes at a premium price, however it deserves it for somebody that wants a great and almost an industrial grade table leading laser engraver efficient in quick cutting and also exact engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription and cutting equipment on our listing is XTool D1 pro, the very best option to Glowforge. It remains in top place because it has obtained the Red Dot Layout 2022 Award. The outstanding design and state-of-the-art technology established this device besides other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and also etch a substantial variety of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and also cutting equipment that works with a wide range of materials, consisting of different kinds of wood. Its powerful and highly concentrated laser can conveniently cut as well as engraved wood with ultimate accuracy and also accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is particularly produced metal and plastic engraving. It can etch numerous steels, consisting of aluminum as well as rare-earth elements. It can likewise do colored etching on different steels, including aluminum.